Use and Care Guides

Travel Mugs

Careful. Beverages may be very hot. For best results always use caution.
Keep out of reach of children when filled with hot liquids.
Prior to drinking, make sure the lid is properly threaded to the body and screwed down completely.
If filling with boiling liquid, allow liquid to cool down WITH THE LID OFF for at least 3 minutes before attaching the lid.
When attaching lid, make sure the drink seal is in the open position.
DO NOT overfill. Fill liquids to just below the fill line in the body as shown.
DO NOT microwave or freeze.
DO NOT use cleaners containing bleach, chlorine, abrasives, and/or other harsh chemicals.
DO NOT continue to use product if damaged.
DO NOT carry bottles containing liquid in bags to help prevent accidental opening.

Suitable for hot or cold beverages.
To attach the lid, apply slight downward pleassure and rotate counter-clockwise until you hear a click and lid falls into place. Then rotate lid clockwise to tighten completely.

Wash thoroughly before first use.
Snap open the drink seal before rinsing or washing.
Rinse immediately after each use with warm water.
Lid and UNPAINTED stainless steel body are top-rack dishwasher safe. HAND-WASH ONLY any PAINTED stainless steel body.
To wash by hand, soak the lid for 10 minutes in hot, soapy tap water. Hand-wash the body with warm water and a mild detergent. Rinse both the lid and body thoroughly before use.

ALWAYS STORE TUMBLER WITH LID REMOVED to allow all parts to dry completely.